Common Frustrations with Trenchers and How to Solve Them
While working with trenching machine or any other kind industrial machines, frustration is a common thing. However, it shouldn’t be like that if you have a good trenching machine and a machine that is properly maintained. If you are working with a bobcat trencher, there are problems that you are likely comes across from time to time.
Most of these frustrations usually occur, as a result, poor maintenance or having poor quality wear parts. But what are the main frustrations that are with these machines? Well, there are many of them. In this article, we are going to look at some of the common problems with bobcat trenchers and how to solve them. Here are just a few of the problems and how to solve them.
Poor Cutting performance
This is one of the biggest frustrations that most people go through. It reaches a stage when the bobcat trencher teeth start to deteriorate. Due to the exposure to rock and abrasive soils, they become dull and blunt. That how they lose their sharpness hence the low performance in the cutting. Under such a condition, it is not difficult to restore the performance of the machine. All you need is to sharpen the tips of the teeth or blades, and you will be good to go. However, if the condition of the condition bobcat trencher teeth is so bad that a repair cannot fix it, then you need to consider making an immediate replacement.
Won’t Dig Deep Enough
Not digging deep is another frustration that you will come across if you are trenching. The problems are mostly associated with aging machines, but it is common to find it in new ones. One of the major reasons why the machine won’t cut deep is the amount of power or pressure that the engine or the drive is providing to the cutter system. If the pressure has dropped, then you need to check the hydraulic system. If the pressure gauge is showing levels, have the system checked. If that is not the problem, then you need to check the bobcat trencher teeth. They could be the cause for the poor cutting performance of the machine. Repair or replace them.
Overheating of the Engine
This is another problem that is partly associated with the poor condition of wear parts and the engine problems. If you notice that your bobcat trencher is overheating, then it is an indication that it is overworking. The reason could either be worn down bobcat trencher teeth or faulty engine. These are two areas that should be checked.